
Occupational Health & Safety Policy
Zero-LTI site discipline built on Namibian law.
Governing every M&M Engineering office, depot and active construction site under the Labour Act, 2007 and Government Notice No. 156 of 1992.
General Policy Statement
- Control occupational health and safety risks across every site and workshop.
- Consult regularly with employees and elected safety representatives on workplace conditions.
- Provide, test and maintain safe plant, lifting machinery and calibrated electrical test gear.
- Control storage, handling and safe disposal of hazardous substances (COSHH).
- Provide induction, task competency training and supervision at zero cost to employees.
- Prevent workplace accidents, injuries and occupational illnesses through annual policy review.
Organisation & Governance
- Directors & Managing Member: Hold overall statutory responsibility and approve annual safety funding.
- Appointed Safety Officer: Audits risk assessments, registers, PPE issue, permits and training compliance.
- Line Managers & Foremen: Enforce method statements, induction records and daily site housekeeping.
- Safety Representatives & Committees: Conduct quarterly inspections; committee convened within 3 months when requested by two or more representatives.
Five-Tier Risk Hierarchy
- Eliminate hazardous activities wherever safer alternative work methods exist.
- Substitute plant or substances for lower-hazard equipment or chemicals.
- Isolate or segregate hazards using interlocked guarding and physical barriers.
- Apply engineering controls (local exhaust ventilation, enclosures, lifting aids).
- Provide compatible PPE strictly as secondary protection where residual risk remains.
Right & Duty to Stop Unsafe Work
Every employee, subcontractor and visitor is empowered and required to pause work immediately if machinery guarding is missing, electrical gear is ungrounded or site ground conditions turn unsafe, reporting at once to the Site Supervisor or Safety Officer.
No Cost Guarantee: No member of staff is charged for mandatory OHS training, inductions or compliant personal protective equipment.
Fire Safety & Emergency Drills
- Escape routes, exits and fire doors kept unlocked and unobstructed throughout shifts.
- Weekly alarm checks; monthly user seal/gauge verification on fire extinguishers; annual external certification (GN 156 Chapter 3).
- Emergency evacuation drills executed in month 1 of employment, 3-monthly for night crews and 6-monthly for day teams.
- Immediate isolation and fire brigade notification for any gas leak or ignition hazard.
Electrical Safety & Lockout / Tagout
- Strict compliance with GN 156 Chapter 9; zero unqualified intervention on live conductors.
- Residual current circuit breakers (RCDs) protecting portable electrical tools; trailing leads excluded from pedestrian walkways.
- Cleaning, servicing or maintenance inside unguarded machinery authorised only after electrical isolation, physical lock-off and tagging.
Lifting Equipment & Plant Inspections
- Cranes, forklifts, HIAB lorry loaders, excavators, telehandlers and hoists display stamped Safe Working Load (SWL) and valid certificates.
- Pre-service thorough examination prior to deployment and following site re-assembly; statutory inspections every 6 or 12 months.
Statutory Accident & Incident Reporting
- Every injury, first-aid case and near miss logged and investigated to prevent recurrence.
- Ministry of Labour / Health Notification: Fatalities, major injuries (fractures other than digits, amputations, dislocations, loss of sight, electric shock/burns >24h hospitalisation, acute chemical/biological illness), hospitalised members of the public, >7-day lost-time injuries (reported within 15 working days) and dangerous occurrences (crane failure, overhead line contact, scaffold collapse >5 m).
COSHH, Noise & Vibration Exposure
- COSHH: Assessed chemical register & Safety Data Sheets held on site; mixing chemical products strictly prohibited.
- Hand-Arm Vibration (HAV): Daily EAV 2.5 m/s² A(8) · Mandatory ELV cap 5.0 m/s² A(8).
- Whole-Body Vibration (WBV): Daily EAV 0.5 m/s² A(8) · Mandatory ELV cap 1.15 m/s² A(8).
- Manual Handling: Task, load and terrain assessed prior to lifting; hoists and trolleys used wherever practicable.
Welfare, Edge Protection & Permits
- Minimum 11 m³ workspace volume per employee, pedestrian/vehicle traffic segregation and daily waste clearing.
- Guardrails at ≥1,100 mm with mid-rail wherever falls ≥2 m (or over hazards) exist; fragile roof signage posted clearly.
- Potable water, washing basins, lockers and clean dining spaces separated from dust zones.
- Subcontractors submit OHS policies, risk assessments and liability insurance prior to arrival plus obtain Permits to Work for hot work, electrical switching, height work and confined spaces.
Appendix 1 · Site Notice Board Template
Project Site Appointed Safety Personnel Register
Completed and displayed on every active M&M Engineering construction notice board prior to site handover:
| Statutory Safety Role | Designated Personnel Slots | Posting Requirement |
|---|---|---|
| Site Safety Officer(s) | Two designated site safety officers per active works package | Full contact details posted on site notice board |
| Safety Representative(s) | Worker-elected workplace health & safety representatives | Quarterly inspection schedule logged |
| First Aid Personnel | Certified first aiders allocated per shift & crew size | First aid station & ambulance contacts posted |
| Fire Safety Wardens | Designated emergency marshals & muster point leads | Extinguisher & alarm check logs maintained |
| Health & Safety Committee Chair | Convened within 3 months of representative request | Annual policy endorsement signed by Management |
Complete Printable Company Profile & Policy Pack
Download the 15-page print-ready PDF containing our full OHS Manual, Appendix 1 form, 25 projects and 23 owned equipment items.
